ADLY MOTO 8-3
Final Transmission Mechanism
Attention of Operation
‧This chapter explain that final reduction mechanism maintance. Can be operated in
the vehicle.
‧For no hurting case cap, changing the bearing of left crank shaft case after
removing the rear break of engine.
‧Use professional tool to change driving shaft and pull out the shaft after fixing
inner ring of bearing.
Diagnosis of Trouble
Engine starts but vehicle does not move.
•Transmission gears broken.
•Transmission gears burns out.
Operate of noise
‧Abrasion、wore and teeth hurted of gear
‧Bearing wore and loosened.
Gear oil leaking
•Too much gear oil filled.
•Oil seal wear-out or damage.
To Next Page
Loading...