ADLY MOTO 12-2
ELECTRICAL DEVICE
Start motor no working
‧Fuse broke.
‧Battery charging insufficiently.
‧Bad main switch.
‧Poor start switch.
‧Poor front / rear brake switch.
‧Poor start breaker.
‧Poor contact or broke of winding.
‧Poor start motor.
Powerless start motor
‧Battery charging insufficiently.
‧Bad contact of winding.
‧Strange thing blocked in motor or
gear.
Start motor return running without
engine return running
‧Bad small gear of start motor.
‧Counter rotation of start motor.
‧Battery power insufficient.
Turn on main switch, but no lighting
‧Bad bulb.
‧Bad switch.
‧Guide wire broke.
‧Fuse broke.
‧Battery discharging.
‧Bad wiring.
Pointer of fuel gage unstable
‧Loose socket head of guide wires.
‧Poor fuel gage.
‧Bad gage.
RPM unsmooth
‧Ignition — primary circuitry
–Bad ignition coil.
–Wire or poor contact.
–Poor contact main switch.
‧Ignition — secondary circuitry
–Bad ignition coil.
–Bad spark plug.
–Bad high voltage wires.
–Power leakage of spark plug.
‧Ignition time
–Bad ACG.
–Poor installation of statue inductor.
–Poor CDI.
Fuel direction light no working (when
without fuel)
‧Insufficient battery power.
‧Fuse broke.
‧Bad main switch.
‧Bad gage.
‧Bad switch of fuel height.
Flashing fuel direction light
‧Loose connection head.
‧Guide wires broke.
‧Poor action of float.
‧Poor fuel gage.