Hercules DJControl Jogvision - Page 4

4/18
FEATURES
1. Touch-sensitive jog wheel
2. MODE (mode selection button + mode LED
indicators for pads
(1)
): Press MODE button +
pad 1/2/3/4 to switch to mode 1/2/3/4
3. 1, 2, 3, 4: Pads 1 to 4 (HotCue and samples)
[SHIFT+Pad: HotCue mode = Erase the
HotCue point / Sample mode = Stop playback
of sample]
4. SHIFT: Press to shift to alternate function
on some controls (indicated in blue)
5. SYNC: Synchronization enabled on
corresponding deck [SYNC OFF:
Synchronization disabled]
21. Crossfader
22. FX DRY > WET: Effects mode = change
amount of effect applied / LOOP SIZE: Loop
mode = change loop size [BEATS: Beat
multiplier, used to adjust the effect]
23. LOOP ON: play a loop of the track – LOOP x ½:
Divide the loop by 2 – LOOP x 2: Double the loop
between 1 and 8 beats / FX1, FX2, FX3: Enable
effects [FX SELECT: Select the effects assigned to
the FX1, FX2, FX3 buttons]
24. AIR FX: Enable/disable air control, which
controls a filter on the corresponding deck
[Manually tap out a track’s tempo]