Page 7For technical questions, please call 1-888-866-5797.Item 59313
Leveling Table Extensions
1. Place a level (sold separately) across Planer Table and Infeed Table, then check level.
Level
Infeed Table
Outfeed Table Planer Table
2. Loosen Lock Nuts.
3. Adjust as needed by lifting Infeed Table and adjusting Leveling Bolts beneath it.
4. Repeat with Outfeed Table.
5. Tighten Lock Nuts.
Infeed Table
Leveling Bolts
(on left and right)
Lock Nut
(on left and right)
Workpiece and Work Area Set Up
1. Designate a work area that is clean and well-lit.
The work area must not allow access by children
or pets to prevent distraction and injury.
2. Route the power cord along a safe route to reach
the work area without creating a tripping hazard or
exposing the power cord to possible damage.
The power cord must reach the work
area with enough extra length to allow
free movement while working.
3. There must not be objects, such as utility lines,
nearby that will present a hazard while working.
To Next Page
Loading...