4/16 – User Manual
4.4. Starting up Mobile DJ MP3
- Double-click the Hercules Mobile DJ Mix icon on your desktop to launch the software.
You should set the two faders all the way up or down and the cross fader all the way to
the left or right before turning on your Mobile DJ MP3 controller. This allows for proper calibration
with the Hercules Mobile DJ Mix software.
- Once the software is launched, turn on Mobile DJ MP3 by setting the power switch to the Power
On position.
You must position your Mobile DJ MP3 console very close to the USB receiver (less than
1 foot away) when connecting to the receiver.
- Holding Mobile DJ MP3 close to the receiver, press any button on the console.
The Mobile DJ MP3’s screen lights up. It is now connected to the USB receiver.
4.5. Using Mobile DJ MP3
Mobile DJ MP3 has been specially designed for handheld mixing, as shown in the illustration
below; it is not intended for use sitting flat on a desk or table.
To Next Page
Loading...
