Hercules RMX2 - Customization and Connections; Connecting Power and USB

2/18 3/18
Connect the DJConsole Rmx2 to your
computer using the USB cable.
Thread both the USB cable and the
power adapter cable through the hook to
prevent accidental disconnection.
Connect the power adapter.
Finally, set the On/O switch to On.
1
43
2
CONNECTIONS
2) Replace the caps on the 14 rotary buttons and the 5 faders.
- Substitute any black caps you wish with the included yellow caps, instead.
CUSTOMIZATION
To customize the look of your DJConsole Rmx2 Premium, you can:
1) Add a black overlay (included) on the controller’s top face.
- Remove the caps from the 14 rotary buttons and the 5 faders.
- Place the black overlay on the controller’s top face.
US
UK