Hercules Rob Family F360 - Integrated Battery; Removing the Integrated Battery; Inserting the Integrated Battery

MY21H01 - 32_1.0_30.07.2020
48
Operation
6.11.3 Integrated battery
Only applies to pedelecs with this equipment
6.11.3.1 Removing the integrated battery
Figure 31: Removing the integrated battery
1 Open battery lock with battery key (see (1)).
 The battery is released and falls into the
retainer guard (see (2)).
2 Hold the battery in your hand from below. Use
the other hand to push on the retainer guard
from above (see (3)).
 The battery is released and falls into the hand
(see (4)).
3 Remove the battery from the frame.
4 Remove the battery key from the battery lock.
6.11.3.2 Inserting the integrated battery
Figure 32: Inserting the integrated battery
1 Place the battery into the lower mount with the
contacts facing the front (see (1)).
2 Flip the battery up so that the battery is held by
the retainer guard (see (2)).
3 Push the battery upwards (see (3)).
 There is an audible clicking noise.
4 Check battery to ensure it is firmly in place.
5 Lock the battery with the battery key;
otherwise, the battery may fall out of the mount
when you open the lock (see (4)).
6 Remove the battery key from the battery lock.
7 Check the battery to ensure it is firmly in place.
(1)
(2)
(3)
(4)
(1)
(2)
(3)
(4)