MY21H01 - 32_1.0_30.07.2020
50
Operation
6.11.5.2 Charging process when one battery
is used
Remove the batteries from their mounts to
charge each one individually.
If only one battery is inserted, only charge the
battery with an accessible charging socket.
The battery with the sealed charging socket
can only be charged outside its mount.
6.11.6 Using double battery model with a
single battery only
One of the charging sockets is not accessible or is
sealed with an end cap on pedelecs with two
batteries
Figure 33: Covering open contacts with cover cap –
example: pannier rack battery
If you wish to use just one battery on a pedelec
which is designed for two batteries, cover the
contacts in the free slot with the supplied cover
cap (see (1)); otherwise, there is a risk of a
short circuit caused by the open contacts.
6.11.7 Waking the battery
The battery switches to sleep mode to protect
itself when not used for a longer period. The LEDs
on the operating status and battery level indicator
do not light up.
Press the On-Off button (battery).
The operating status and battery level indicator
shows the battery level.
To Next Page
Loading...