MY21H01 - 32_1.0_30.07.2020
57
Operation
6.15 Gear shift
The selection of the appropriate gear is a
prerequisite for a physically comfortable ride and
making sure that the electric drive system
functions properly. The ideal pedalling frequency
is between 70 and 80 revolutions per minute.
Stop pedalling briefly when changing gears.
This makes it easier to switch gears and
reduces wear on the drivetrain.
6.15.1 Using the derailleur gears
Only applies to pedelecs with this equipment
The speed and range can be increased while
applying the same force if you select the right
gear. Use the derailleur gears.
Figure 36: Down shifter (1) and up shifter (2) on the left (I)
and right (II) gear shift
Select the appropriate gear with the shifter.
The gear shift switches the gear.
The shifter returns to its original position.
Clean and lubricate the rear derailleur if gear
changes block.
To Next Page
Loading...