MY21H01 - 32_1.0_30.07.2020
80
Documents
Technical inspection, checking safety, test ride
Drive/gear shift
Chain/cassette/
pinion/chainring
Check for damage O.K. Damage
Refasten if necessary or replace
as specified in parts list
Chain guard/spoke
guard
Check for damage O.K. Damage Replace as specified in parts list
Bottom bracket axle/
crank
Check mount fastening O.K. Loose Retighten screws
Pedals Check mount fastening O.K. Loose Retighten screws
Shifter Check mount fastening Functional check O.K. Loose Retighten screws
Shift cables Check for damage Functional check O.K. Loose or defective
Adjust shift cables; new shift
cables if necessary
Front derailleur Check for damage Functional check O.K.
Gear shift difficult or not
possible
Adjust
Rear derailleur Check for damage Functional check O.K.
Gear shift difficult or not
possible
Adjust
Electric drive
Display Check for damage Functional check O.K.
No screen, defective
screen display
Restart, test battery, new
software, or new display – take
out of service,
Electric drive control
panel
DriveCheck for damage Functional check O.K. No response
Restart; contact control panel
manufacturer, new control panel
Tachometer Speed measurement O.K.
Pedelec travelling 10% too
fast/slow
Take pedelec out of service until
the source of the error is found
Cabling Visual inspection O.K.
Failure in system, damage,
kinked cables
New cabling
Battery mount
Firmly in position, lock,
contacts
Functional check O.K.
Loose; lock doesn't close,
no contacts
New battery mount
Motor
Visual inspection and
mount
O.K. Damage, loose
Refasten motor, contact motor
manufacturer, new motor
Software Check version
In latest
version
Not latest version Import update
Components Description Criteria Measures if rejected
Components Description Criteria Measures if rejected
Assembly/inspection Tests Accept-
ance
Rejection
Brake system
Functional check O.K. No full braking; braking
distance too long
Locate defective part in brake
system and correct
Gear shift under
operating load
Functional check O.K. Problems when shifting
gear
Readjust gear shift
Suspension
components (fork,
shock absorber, seat
post)
Functional check O.K. Suspension too deep or no
longer exists
Locate defective component and
correct
Electric drive
Functional check O.K. Loose connection,
problems when riding,
accelerate
Locate defective part in electric
drive and correct
Light system
Functional check O.K. No continuous light, too
bright
Locate defective part in light
system and correct
Test ride
No strange
noises
Strange noises Locate source of noise and
correct
Date:
Fitter's name:
Final inspection by workshop manager
To Next Page
Loading...