HermanMiller Nelson Thin Edge Bed - Step 3: Attach Outer Legs; Step 4: Flip Bed Frame; Step 5: Attach Top Rails; Step 6: Attach Headboard

HermanMiller Assembly Instructions2
Attach outer legs using 4 Short Bolts per leg.
Attach wooden top rails to both ends using Medium Bolts. Ensure medallion is
facing outward.
Flip bed frame over so it is right side up being careful not to put
weight on legs while flipping.
Step 3
Step 5
Step 4
Step 6
Steel Leg Option
Wood Leg Option
Medium Bolt
Short Bolt
Branding Medallion
Attach headboard to bed frame at the end with medallion
on top rail. Use 4 Short Bolts for each headboard support plate.