HermanMiller SAYL CHAIR User Manual

Adjustment Guide1Sayl Chair
ADJUSTMENT GUIDE
SAYL
®
CHAIR
TO RAISE:
Take your weight o chair,
li tab up.
1. SEAT HEIGHT:
Lever next to tilt tension knob,
right side of chair
TO LOWER:
While seated, li lever up.
At the proper height, your feet should
rest flat on the floor.
3. TILT TENSION:
Knob below right side of seat
TO INCREASE TENSION:
Turn knob clockwise.
TO DECREASE TENSION:
Turn knob counterclockwise.
Set the tilt tension to control the resistance
you feel when leaning back.
TO INCREASE DEPTH:
Pull lever out, slide thighs forward
to adjust seat; release lever.
2. SEAT DEPTH:
Lever under left side of seat
TO DECREASE DEPTH:
Pull lever out, push seat back
and release lever.
In the proper position, you will have
approximately three-ngers of clearance
between the back of your knees and
the seat edge.
Get the most out of your chair by
ne-tuning its highly technical adjustment
features so you can sit exactly how you
want. Get situated at your gaming set-up,
sitting the way you usually do, and follow
these steps to enjoy a healthier, more
comfortable gaming experience.

HermanMiller SAYL CHAIR Specifications

General

Manufacturer	Herman Miller
Seat Material	Fabric or Vinyl
Back Height	22.5"
Arm Options	Fixed
Environmental Certification	GREENGUARD Gold
Category	Office Chair
Back Material	Elastomeric
Tilt Limiter	Yes
Lumbar Support	Optional
Armrest Type	Fixed or adjustable
Warranty	12 years

Summary

Seat Height Adjustment

Raise Seat Height

Lift tab up while chair is unloaded to raise the seat height.

Lower Seat Height

Lift lever up while seated to lower the seat height.

Seat Depth Adjustment

Increase Seat Depth

Pull lever, slide thighs forward to adjust seat depth, then release lever.

Decrease Seat Depth

Pull lever, push seat back to decrease seat depth, then release lever.

Tilt Tension Adjustment

Increase Tilt Tension

Turn the knob clockwise to increase the tilt tension.

Decrease Tilt Tension

Turn the knob counterclockwise to decrease the tilt tension.

Forward Tilt Adjustment

Position Chair Forward

Recline and flip the front horizontal tab down to position the chair forward.

Resume Horizontal Position

Recline and flip the front horizontal tab up to resume the horizontal position.

Tilt Limiter

Engage Tilt Limiter

Recline and move the back horizontal tab up to define the limit of recline.

Release Tilt Limiter

Lean forward and flip the back horizontal tab fully downward to release.

Arm Height Adjustment

Adjust Arm Height

Squeeze lever on arm stem while adjusting arm to desired height.

Arm Angle and Width Adjustment

Adjust Arm Angle

Grasp armpad and pivot arm in or out.

Adjust Arm Width

Grasp armpad to pull in or push out.

Arm Depth Adjustment

Adjust Arm Depth

Grasp armpad and slide forward or backward.