Need help?Do you have a question about the Hermle UWF 902 H and is the answer not in the manual?
Overview of the Hermle UWF 902 H milling machine tool, its capabilities, and standard features.
Graphical representation of the machine's spindle speed, torque, and power characteristics.
Details the X, Y, and Z axis working ranges and potential limitations.
Comprehensive specifications for main drive, feed drive, noise level, working range, and measuring system.
Diagram and specifications for the machine's installation footprint and floor load.
Critical safety guidelines for handling and transporting the machine to prevent accidents.
Step-by-step procedures and diagrams for safely moving the machine during transport.
Guidelines for setting up the machine, including levelling and fixing requirements.
Procedures and safety notes for connecting the machine to the electrical mains.
Steps for powering on the machine for the first time and initial configuration.
General and specific safety rules to follow during machine operation and maintenance.
Procedures for powering on the machine and initiating basic functions.
Description of different operational modes (Manual, Setup, Production) and their safety levels.
Information on how to securely clamp tools in the spindle and related safety warnings.
Procedure for setting up and performing operations using the horizontal spindle.
Procedure for setting up and performing operations using the vertical spindle.
Details of configurable parameters that affect machine behavior and settings.
Instructions on how to modify machine parameters, including machine code.
Overview, technical data, loading, and operation of the automatic tool changer system.
Details on the application, operation, and attachment of the rigid clamping table.
Information on the functions, usage, and technical data of the universal clamping table.
Description of the NC-rotary table's capabilities, operation, and technical specifications.
Details on using a 3-D probe for workpiece measurement and positioning.
Information on the swarf conveyor for continuous chip removal and its operation.
Application, operation, and technical data for the NC-precision dividing head.
Procedure for using and maintaining the internal coolant supply system.
General rules for machine care to maintain accuracy and operational capability over time.
Scheduled maintenance tasks based on operating hours or time intervals.
Table outlining lubrication points, recommended lubricants, and relevant pages.
Recommendations for selecting appropriate oils and lubricants for machine systems.
Procedures for oil changes and maintenance of the NC-rotary table.
Working instructions and maintenance for protecting the main spindle.
Procedures for checking lubricant levels, cleaning, and maintenance of the cooling system.
Instructions for topping up hydraulic fluid and changing hydraulic oil.
Procedure for safely securing the cross slide rest before removing the feed motor.
Troubleshooting guide for common errors related to the spindle slide.
Troubleshooting specific errors and messages related to the UTC 34 tool changer.
Troubleshooting common issues and error messages related to the tool magazine.
Guidance for resolving various other operational errors and screen messages.
General| Brand | Hermle |
|---|---|
| Model | UWF 902 H |
| Category | Laboratory Equipment |
| Language | English |
To Next Page
