Hertz AMPLIFIER - Technical Specifications; HCP 1 D Specifications; HCP 2 Specifications

Advanced Web Manual
HCP
29
HCP 1D HCP 2
Inputs / Outputs / Filter
INPUTS: PRE IN / SPEAKER IN
Preout Hi-Pass
: 50 ÷ 250 Hz @ 12 dB/Oct.
Filters FULL: Yes
Lo-Pass: 50 ÷ 250 Hz @ 24 dB/Oct.
SUBSONIC (on/off): 25 Hz @ 24 dB/Oct.
BOOST 50 Hz (adjust): (0 ÷ 12) dB
PHASE (adjust): (0 ÷ 180) deg
Remote Volume Control (adjust): (-50 ÷ 6) dB
Amplifier Stage
Features:
Distorsion - THD (100 Hz @ 4Ω): 0.02 %
Bandwidth: 10 ÷ 22k Hz
S/N Ratio (A weighted @ 1 V): 100 dB
Damping factor (100 Hz @ 4Ω): 80
Pre-In sensitivity: 0.6 ÷ 5 VRMS (15 kΩ)
Speaker-In sensitivity: 1.5 ÷ 12 VRMS (47Ω)
Load impedance (MIN): 2Ω
Output Power (RMS) @ 14.4 VDC, THD 1%:
1 Ch: 320 W x 1 (4Ω)
1 Ch: 550 W x 1 (2Ω)
Output Power (RMS) @ 14.4 VDC, THD 10%:
1 Ch: 380 W x 1 (4Ω)
1 Ch: 700 W x 1 (2Ω)
CEA 2006-A Ratings:
RMS Power
(4Ω
,≤1 %THD+N, 14.4 V): 300 W x 1 Ch
S/N Ratio (ref. 1 W output): 80 dBA
Power Supply
Power supply voltage / fuse: 11÷15 VDC / 2 x 25 A
Idling current (power ON/OFF): 1 A / 0.04 mA
Consumption @ 2Ω, 14.4 VDC
(Max Musical Power):
25 A
Remote In: 7 ÷ 15 VDC - 1 mA
ART: Automatic Remote Turn-On/Off with Speaker-In
Size / Weight
Max size (mm / in.): 215 x 190 x 50 / 8.46” x 7.48” x 1.97”
Weight (kg / lb.): 1,94 / 4.27
Power Supply
Power supply voltage / fuse: 11÷15 VDC / 1 x 20 A
Idling current (power ON/OFF): 0. 4 A / 0.04 mA
Consumption @ 2Ω, 14.4 VDC
(Max Musical Power):
12 A
Remote In: 7 ÷ 15 VDC - 1 mA
ART : Automatic Remote Turn-On/Off with Speaker-In
Inputs / Outputs / Filter
INPUTS: PRE IN / SPEAKER IN
Preout FULL range (FRONT): Yes
Filters FULL: Yes
Hi-Pass: 80 Hz @ 12 dB/Oct.
Lo-Pass: 50 ÷ 500 Hz @ 12 dB/Oct.
MONO (on/off): Yes
BOOST 50 Hz (select): (0 / 6 / 12) dB
Amplifier Stage
Features:
Distorsion - THD (100 Hz @ 4Ω): 0.01 %
Bandwidth: 10 ÷ 65k Hz
S/N Ratio (A weighted @ 1 V): 103 dB
Damping factor (100 Hz @ 4Ω): 200
Pre-In sensitivity: 0.6 ÷ 5 VRMS (15 kΩ)
Speaker-In sensitivity: 1.5 ÷ 12 VRMS (47Ω)
Load impedance (MIN) @ 2 Ch: 2Ω
@ 1 Ch: 4Ω
Output Power (RMS) @ 14.4 VDC, THD 1%:
2 Ch: 55 W x 2 (4Ω)
2 Ch: 85 W x 2 (2Ω)
1 Ch: 170 W x 1 (4Ω)
Output Power (RMS) @ 14.4 VDC, THD 10%:
2 Ch: 65 W x 2 (4Ω)
2 Ch: 100 W x 2 (2Ω)
1 Ch: 200 W x 1 (4Ω)
CEA 2006-A Ratings:
RMS Power
(4Ω
,≤1 %THD+N, 14.4 V): 50 W x 2 Ch
S/N Ratio (ref. 1 W output): 82 dBA
Size / Weight
Max size (mm / in.): 215 x 190 x 50 / 8.46” x 7.48” x 1.97”
Weight (kg / lb.): 1,80 / 3.96
10 TECHNICAL SPECIFICATIONS
Esec_AWM Amplificatori HCP_preliminary.indd 29 20/06/13 17:03