18
Charging the Battery
1. Insert the battery with both guide pins in the
corresponding guide bars into the battery
compartment of the battery charger.
2. Press the battery on the marked spot until it
latches into its compartment. The charge LED
illuminates.
3. When the battery is fully charged, the charge LED
flashes.
4. Leave the battery in the charger until it is needed.
The charger supplies a “trickle” charge but will not
over-charge the battery.
Hetronic Battery Information
Standard Hetronic rechargeable batteries are the nickel
metal hydride type. These batteries have no “memory
effect” when charging a battery that is not fully
discharged.
Charge LED
Battery
guide pin
Battery
guide bar
European AC
US/Japan AC
DC
Cigarette
Lighter
Adapter
DC Only
Battery Charger Power Options
Optional
To Next Page
Loading...
