Do you have a question about the Hettich HAEMATOKRIT 200 and is the answer not in the manual?
Type | Centrifuge |
---|---|
Model | HAEMATOKRIT 200 |
Capacity | 24 capillaries |
Timer | Yes |
Running time | 1 to 99 minutes |
Power Supply | 220-240 V / 50-60 Hz |
Dimensions | 261 x 353 x 228 mm |
Guidelines for safely moving the centrifuge.
Recommended conditions for storing the centrifuge.
Procedure for safely opening the centrifuge lid.
Procedure for safely closing the centrifuge lid.
Meanings of icons and indicators on the centrifuge display.
Functionality of each button on the control panel.
Available settings for centrifugation parameters like time, speed, and RCF.
Method for directly setting speed, RCF, radius, and runtime.
Performing a run with a specific duration.
Running the centrifuge indefinitely until stopped manually.
Performing brief, timed centrifugation cycles.
Accessing device model, serial number, and software versions.
Adjusting audible alerts for run completion and errors.
Configuring display backlighting to indicate the end of a centrifugation run.
Setting the lid to unlock automatically after a run.
Enabling automatic dimming of the display to save energy.
Retrieving total operating hours and number of completed runs.
Formula for calculating the required centrifugation time.
Method for reading results using the evaluation disk.
Steps for regular cleaning of the centrifuge housing and chamber.
Guidelines for disinfecting the centrifuge chamber.
Instructions for cleaning rotors and lids after potential contamination.
Information on rotor expiration dates and replacement.