Need help?Do you have a question about the Hettich ROTOFIX 32 and is the answer not in the manual?
General| Type | Benchtop Centrifuge |
|---|---|
| Maximum Speed | 6, 000 RPM |
| Maximum Capacity | 4 x 100 ml |
| Temperature Control | No |
| Power Supply | 230 V, 50/60 Hz |
| Timer | 1 - 99 min, continuous operation |
Explains the power board as a combination of control, voltage supply, and frequency converter, listing its tasks.
Provides instructions for performing a mains reset by switching the mains off and on again.
Lists error codes, their brief descriptions, and the page number for detailed information.
Details troubleshooting for various error codes, including causes, measurements, and reset procedures.
Covers issues without displayed error codes, like no speed indication or lid lock failures.
Details the permissible imbalance specification and how to adjust the imbalance switch.
Guides on unplugging, removing, and exchanging the power board, noting heat-conducting paste.
Presents the main circuit diagram and details the plug assignments for components.
Provides test results and signal measurements for key components like speed sensor and motor.
To Next Page