Need help?Do you have a question about the Hettich MIKRO 200 and is the answer not in the manual?
General| Max. Speed | 13, 500 rpm |
|---|---|
| Weight | 11 kg |
| Timer | 59 min, 50 s or continuous |
| Power Supply | 220-240 V, 50/60 Hz |
| Dimensions (W x D x H) | 29 x 36 x 24 cm |
Guidance on how to read and use the document effectively.
Explanation of language conventions used in the document.
Explanation of markers and symbols used throughout the manual.
Defines the specific applications and purpose of the centrifuge.
Specifies qualifications, training, and protective equipment for users.
Details uses or environments that are not permitted for the device.
Outlines potential misuse scenarios and manufacturer recommendations.
Defines the operator's duties regarding safe use and compliance.
Covers general safety advice, warnings, and hazard information.
Details specific warnings for maintenance, electrical shock, and hazardous substances.
Provides detailed specifications, power requirements, and performance metrics.
Specifies environmental operating limits and electromagnetic compatibility.
Lists the physical size, weight, and related specifications of the device.
Explains the details found on the device's rating plate.
Details CE marking and regulatory compliance.
Describes symbols and instructions for handling the shipping container.
Instructs users not to remove or cover labels on the device.
Overview of the centrifuge's controls and display indicators.
Details the function of various buttons, knobs, and indicators.
Guidance on using only manufacturer-approved spare parts and accessories.
Lists the accessories included with the centrifuge.
Instructions for returning the device to the manufacturer.
Specifies requirements for safely transporting and storing the centrifuge.
Details environmental requirements for storing the device.
Step-by-step guide to securing the device for transport.
Instructions and safety precautions for removing the device from its packaging.
Procedure for removing protective transport locks.
Guidance on physically placing and positioning the device.
Steps for connecting the device to the mains power supply.
Procedure for powering the device up and down.
Instructions for safely opening and closing the centrifuge lid.
Detailed steps for safely removing and installing centrifuge rotors.
Guidelines for correctly filling and placing sample tubes in the rotor.
Explanation and use of biosafety systems for hazardous materials.
Specific instructions for lids with screw caps without holes.
Details continuous and time-preselected centrifugation operations.
Procedure for performing brief centrifugation runs.
How to rapidly stop the rotor.
Explanation of how to set and adjust centrifugation parameters.
Calculations for adjusting speed based on sample density.
How to enable or disable protection against program changes.
Steps for opening, loading, entering, and changing programs.
Information on using the cooling function and standby cooling.
Details on the standby cooling feature and its settings.
Procedure for pre-cooling the rotor before use.
How to navigate and access the machine menu.
How to retrieve system data like program version and operating hours.
Configuration options for audible signals and alerts.
A table summarizing maintenance and cleaning activities.
General guidelines and safety warnings for cleaning the device.
Step-by-step instructions for cleaning the centrifuge, biosafety systems, and accessories.
Instructions for disinfecting the device and its accessories.
Information on which accessories can be autoclaved and precautions.
Details on greasing seals and checking components.
Procedures for checking accessories, biosafety systems, and the centrifuge chamber.
Information on accessories with time-limited usage.
Safety precautions and procedures for broken centrifuge tubes.
A table listing error codes, their causes, and corrective actions.
Procedures for resetting the device and manually opening the lid.
Instructions for safely replacing a blown mains fuse.
Information on the proper disposal of the centrifuge and environmental considerations.
Specifications for the 4-place angle rotor (2418-A), including capacity and speed.
Specifications for the 24-place angle rotor (2428), including capacity and speed.
Specifications for the 30-place angle rotor (2430-B), including capacity and speed.
Specifications for the 24-place angle rotor (2434), including capacity and speed.
Specifications for the 30-place angle rotor (2437), including capacity and speed.
To Next Page