Hettich MIKRO 200 - Ambient conditions and EMC; Device dimensions and weight

AB2400en_SARev.: 03 / 11.2023
10 / 40
Device overview
Ambient conditions (EN / IEC 61010-1):
Installation site indoors only
Altitude up to 2000 m above sea level
Ambient temperature 2°C to 40 °C
Humidity maximum relative humidity 80%for temperatures up to 31°C,
decreasing linearly to 50%relative humidity at 40°C.
Overvoltage category
(IEC 60364-4-443)
II
Pollution level 2
Device protection class I
not suitable for use in potentially explosive atmospheres.
EMC:
Emitted EM interference,
EM interference immunity
EN/IEC61326-1
Class B
FCC Class B
Noise level
(rotor-dependent)
£58dB(A)
Dimensions:
Width 275 mm
Depth 344 mm
Altitude 260 mm
Weight approx.11.5kg
Manufacturer Andreas Hettich GmbH & Co.KG,
D-78532 Tuttlingen
Model MIKRO 200 R
Type 2405 2405-07 2405-01
Mains voltage (±10%) 200-240V1～ 200-240V1～ 110-127V1～
Mains frequency 50 Hz 60 Hz 50-60 Hz
power consumption 450 VA 2450 VA 630 VA
Power consumption 1.9A 2.0A 5.0A
Refrigerant R134a
max. capacity 30x2.0ml
max. permissible density 1.2kg/dm³