Hettich MIKRO 185 User Manual

Rev. 02 / 11.2022 Andreas Hettich GmbH & Co. KG AB1203EN_SA
MIKRO 185
EN
Operating Manual............................................................ 3

Hettich MIKRO 185 Specifications

General

Type	Microcentrifuge
Temperature Range	Not applicable
Capacity	24 x 1.5/2.0 ml tubes
Timer Range	continuous
Power Supply	100-240 V, 50/60 Hz
Motor	Brushless motor

Summary

How to use these operating instructions

Intended use

Remaining risks

Technical specifications

Notes on safety

Removing the transport securing device

Initial operation

Opening and closing the lid

Opening the lid

Closing the lid

Installation and removal of the rotor

Loading the rotor

Closing biosafety systems

Operating and display elements

Control panel keys

Details the function of each key on the centrifuge's control panel.

Setting options

Explains the various setting options available on the centrifuge control panel.

Entering centrifugation parameters

Direct input of centrifugation parameters

Describes how to directly input centrifugation parameters like speed and time.

Input with the "SELECT" key

Details how to input centrifugation parameters using the SELECT key.

Centrifugation

Centrifugation with preset time

Explains how to perform centrifugation using a preset time.

Continuous run

Details how to perform a continuous centrifugation run.

Emergency Stop

Settings and queries

Relative centrifugal force (RCF)

Emergency unlocking

Maintenance and servicing

Centrifuge (housing, lid and centrifuging chamber)

Rotors and Attachments

Faults

Change mains input fuses