EN
10/38 Rev. 02 / 11.2022 AB1203EN_SA
7 Transport and storage
7.1 Transport
Before transporting the device, the transport securing device must be installed.
When the device and accessories are transported, the following ambient conditions must be complied with:
Ambient temperature: -20°C to +60°C
Relative humidity: 10% to 80%, non-condensing
7.2 Storage
The device and the accessories may only be stored in closed and dry rooms.
When the device and accessories are stored, the following ambient conditions must be complied with:
Ambient temperature: -20°C to +60°C
Relative humidity: 10% to 80%, non-condensing
8 Scope of delivery
The following accessories are delivered with the centrifuge:
1 Power cord
2 fuses
1 hex head wrench
1 operating manual
1 information sheet, transport securing device
1 information sheet, emergency unlocking
The rotor(s) and associated accessories are included in the delivery in the quantity ordered.
To Next Page
Loading...
