Hettich MIKRO 185 - Technical specifications

EN
AB1203EN_SA Rev. 02 / 11.2022 7/38
5 Technical specifications
Manufacturer
Andreas Hettich GmbH & Co. KG
D-78532 Tuttlingen
Model MIKRO 185
Basic-UDI-DI 4050674010009QG
Type 1203 1203-01
Mains voltage ( 10%) 200 - 240 V 1 100 - 127 V 1
Mains frequency 50 - 60 Hz 50 - 60 Hz
Connected load 390 VA 390 VA
Current consumption 1.8 A 3.6 A
Max. capacity 24 x 1.5 / 2.0 ml
Allowed density
1.2 kg/dm
3
Speed (RPM) 14000
Force (RCF) 18845
Kinetic energy 2450 Nm
Obligatory inspection
(DGUV Regel 100 - 500)
no
Ambient conditions (EN / IEC 61010-1)
 Set-up site
Indoors only
 Altitude
Up to 2000 m above sea level
 Ambient temperature
2°C to 40°C
 Humidity
Maximum relative humidity 80% for temperatures up to 31°C, linearly
decreasing to 50% relative humidity at 40°C.
 Excess-voltage category
(IEC 60364-4-443)

 Pollution degree
2
Device protection class

Not suitable for use in explosion-endangered areas.
EMC
 Emitted interference,
Interference immunity
EN / IEC 61326-1, Class B FCC Class B
Noise level (dependent on rotor)
 59 dB(A)
Dimensions
 Width
261 mm
 Depth
353 mm
 Height
228 mm
Weight approx. 11 kg