Why does my Hettich EBA 200 Laboratory Equipment show 'IMBALANCE'?
The 'IMBALANCE' error on your Hettich Laboratory Equipment typically means the rotor isn't evenly loaded. To resolve this, open the lid, check the rotor loading, and then repeat the centrifugation run.
How to fix no display on Hettich EBA 200 Laboratory Equipment?
If your Hettich Laboratory Equipment has no display, the issue could be due to no power or defective mains input fuses. Check the supply voltage and the mains input fuses. Also, verify that the mains switch is in the [I] position.
What to do if my Hettich EBA 200 Laboratory Equipment shows an IMBALANCE error?
If you see an IMBALANCE error on your Hettich Laboratory Equipment, it means the rotor is unevenly loaded. To resolve this, open the lid, check the loading of the rotor to ensure it is balanced, and then repeat the centrifugation run.
Why does no error number appear on the display of my Hettich Laboratory Equipment?
If no error number appears on the display of your Hettich Laboratory Equipment, it could be due to no power or defective mains input fuses. Check the supply voltage and the mains input fuses. Also, ensure that the mains switch is in the [I] position.
General| Type | Centrifuge |
|---|---|
| Capacity | 8 x 15 ml |
| Power Supply | 220-240V, 50/60Hz |
| Max Speed | 6000 rpm |
| Timer | 1-99 min |
| Weight | approx. 9 kg |
| Max. Speed | 20000 rpm |
| Max. RCF (second model) | 30000 x g |
| Dimensions (second model) | 400 x 400 x 300 mm |
Information on how to use this manual and where to find updates.
Defines the centrifuge's purpose and regulatory compliance as an IVD medical device.
Outlines necessary qualifications, trained user roles, and personal protective equipment.
Details the operator's duties for safe and proper device use, including information provision.
Crucial warnings, dangers (contamination, fire, explosion, electrical shock, loose rotor), and precautions for safe operation.
Specifications including voltage, frequency, power, capacity, speed, and density limits.
Environmental requirements for installation and physical dimensions of the device.
Details EU conformity, registration numbers, and important packaging labels.
Explains essential labels affixed directly to the centrifuge for user guidance.
Identifies and explains the functions of controls, buttons, and indicators on the device panel.
Information on original parts, included accessories, and the return process.
Guidelines for safe handling, temperature, humidity, and securing during transport and storage.
Instructions for securing the centrifuge during transport.
Steps for safely removing the centrifuge from its packaging.
Procedure for detaching the transport lock mechanism.
Instructions for placing, connecting, and ensuring proper installation environment.
Steps for powering the centrifuge on and off safely.
Procedures for safely opening and closing the centrifuge lid.
Instructions for rotor maintenance, with specific notes for EBA 200 S.
Guidance on correctly loading sample tubes into rotors, including safety warnings.
Details on continuous, timed, and short-term centrifugation procedures.
How to set speed, time, RCF, and other parameters using the control panel.
Detailed steps for setting the centrifugation duration.
How to input and adjust rotational speed (RPM) and relative centrifugal force (RCF).
Accessing and using system information, cycle counters, and operating hours.
Configuration of sound alerts and indicator backlight behaviour.
Setting the function for automatic lid opening after centrifugation.
Summary table of cleaning, disinfection, and maintenance schedules.
Step-by-step guide for cleaning the centrifuge housing and accessories.
Instructions on how to disinfect the device and its components.
Details on greasing seals, checking parts, and autoclaving procedures.
Table listing common errors, their causes, and solutions.
Procedure to reset the device after certain errors or power interruptions.
Manual method to open the lid in case of power failure.
Instructions for safely replacing blown fuses.
Guidelines for environmentally sound disposal of the centrifuge.
Technical specifications and compatibility for the 8-place angle rotor.
To Next Page
