Need help?Do you have a question about the Hettich EBA 20 C and is the answer not in the manual?
General| Max Speed | 20, 000 rpm |
|---|---|
| Cooling | Yes |
| Timer | 1 - 99 min |
| Power Supply | 230 V, 50/60 Hz |
| Type | Centrifuge |
| Motor | Brushless |
Safety requirements for electrical equipment according to IEC 61010 standards.
EMC requirements for electrical equipment based on EN 61326-1 and generic standards.
Applicable European directives such as Machinery, EMC, and Low Voltage directives.
Relevant medical device regulations for USA and Canada.
Compliance with ISO 9001, ISO 13485, and ISO 14001 standards.
Procedure for opening the centrifuge lid, including conditions for operation.
Instructions for properly closing the centrifuge lid to ensure safety and proper function.
Explanation of the symbols and indicators found on the centrifuge control panel.
Details on the function of each key and available setting options for operation.
Guidelines for cleaning, disinfecting, and maintaining the centrifuge housing, lid, and chamber.
Instructions for cleaning, inspecting, and maintaining rotors, accessories, and containers, including service limits.
Troubleshooting steps for when the centrifuge display shows no output or error.
Diagnosis and remedy for speed, system reset, and rotor balance errors.
Troubleshooting for communication, motor overload, and overspeed issues.
Troubleshooting steps for faults related to the lid locking mechanism or closure.
Detailed specifications and compatibility information for rotors and accessories.
To Next Page