Need help?Do you have a question about the Hettich EBA 280 and is the answer not in the manual?
General| Brand | Hettich |
|---|---|
| Model | EBA 280 |
| Category | Laboratory Equipment |
| Language | English |
Instructions on how to read and use the document effectively.
Explanation of gender-neutral language used in the manual.
Explanation of markers and symbols used throughout the manual for clarity.
Defines the proper and intended use of the centrifuge as an in vitro diagnostic medical device.
Outlines the qualifications and responsibilities of trained users and required personal protective equipment.
Details the operator's duties regarding information provision and personnel training for safe operation.
Provides critical safety warnings for hazardous situations like contamination and fire hazards.
Covers warnings for insufficient maintenance, electric shock, hazardous substances, and rotating rotor risks.
Presents detailed technical specifications, dimensions, and ambient conditions for the centrifuge models.
Details and explanations of the components on the device's rating plate for identification.
Information on device conformity with EU directives and single registration number.
Explains the meaning of labels found on the shipping container for transport and storage.
Describes essential labels affixed to the centrifuge itself, such as general danger and biohazard warnings.
Identifies and explains the main control buttons and display elements on the centrifuge.
Describes the function and appearance of various indicator lights and symbols on the device.
Details the operation of specific control buttons like the mains switch.
Emphasizes the importance of using only manufacturer-approved original spare parts.
Lists the accessories included with the centrifuge as standard.
Outlines the necessary conditions for safe transport and storage of the centrifuge.
Specifies requirements for storing the device, emphasizing dry rooms and original packaging.
Provides step-by-step instructions for safely unpacking the centrifuge.
Details the procedure for removing the transport lock mechanism from the centrifuge.
Covers guidelines for physically setting up and connecting the centrifuge.
Step-by-step guide for powering on the centrifuge and initial indicator status.
Instructions on how to properly turn off the centrifuge.
Detailed procedure for safely opening and closing the centrifuge lid.
Instructions for safely removing and installing different types of rotors.
General guidance on loading the centrifuge with samples.
Guidance on how to fill centrifuge tubes safely and correctly.
Specific instructions and diagrams for loading angle rotors symmetrically.
Steps for running the centrifuge without a preset time limit.
Instructions for setting a specific runtime for centrifugation cycles.
How to perform short centrifugation runs using the pulse function.
Procedures for modifying parameters while a centrifugation run is in progress.
How to activate the quick stop function to halt the centrifuge rapidly.
Overview of parameters that can be set for centrifugation.
How to set and adjust the ramp-up and ramp-down speed levels.
Instructions for setting the centrifugation duration in minutes and seconds.
How to set the desired speed in Revolutions Per Minute (RPM).
Explains RCF and how to calculate it for centrifuge operations.
Procedure for setting RCF and correlating it with the centrifuging radius.
Guidelines for centrifuging substances with densities exceeding 1.2 kg/dm³.
Steps to load previously saved centrifugation programs from memory.
How to create new programs or modify existing ones.
Instructions for saving custom centrifugation parameters to program locations.
Explains the automatic saving of centrifugation data to a buffer location.
Process of the centrifuge identifying the installed rotor and displaying its maximum speed.
How to access and view centrifuge model, software version, and other system details.
Information on the cycle counter, including entering max cycles and resetting it.
How to check internal and external operating hours and total centrifugation runs.
Instructions to enable or disable the 'Dual time' function for runtime counting.
Configuration of audible signals for run completion and errors.
How to configure visual signals like indicator backlight flashing after runs for power saving.
Setting whether the lid unlocks automatically after centrifugation run completion.
Configuration for displaying program data upon device startup, e.g., last used program.
How to configure the indicator backlight for power saving to switch off after 2 minutes.
A summary table of cleaning and maintenance tasks, frequencies, and page references.
General instructions and warnings regarding cleaning and disinfection procedures.
Detailed steps for cleaning the centrifuge and its accessories.
Procedures for disinfecting the centrifuge and its accessories.
Information on which accessories can be autoclaved and precautions to take.
How to lubricate the rubber seal for proper function and longevity.
Instructions for greasing the trunnions with Hettich Tubenfett 4051.
How to inspect accessories for wear, corrosion, and proper seating.
Table listing common faults, their causes, and remedies for the centrifuge.
Steps to perform a system reset by cycling the main power switch.
Procedure for manually unlocking the lid in case of motor failure or power loss.
Instructions for safely replacing the main input fuses, including fuse types and order numbers.
Information on how to properly dispose of the centrifuge, including contact information and environmental warnings.
Details capacity, dimensions, speed, RCF, and temperature rise for Rotor 1146.
Details capacity, dimensions, speed, RCF, and temperature rise for Rotor 1147.
Details capacity, dimensions, speed, RCF, and temperature rise for Rotor 1147 + 1063-6.
Details capacity, dimensions, speed, RCF, and temperature rise for Rotor 1142.
Details capacity, dimensions, speed, RCF, and temperature rise for Rotor 1148.
Details capacity, dimensions, speed, RCF, and temperature rise for Rotor 1137.
Details capacity, dimensions, speed, RCF, and temperature rise for Rotor 1135 + 1054-A.
Details capacity, dimensions, speed, RCF, and temperature rise for Rotor 1139.
Details capacity, dimensions, speed, RCF, and temperature rise for Rotor 1133.
To Next Page
