Hettich EBA 280 - Centrifugation Data Displayed After Switching On; Indicator Backlight

AB1101en_SARev.: 03 / 11.2023
34 / 44
Software operation
7. Press the [STOP/OPEN] button once to exit the ‘-> Settings’ menu
or
Press the [STOP/OPEN] button twice to exit the ‘*MACHINE MENU*’ .
7.4.8
Centrifugation data displayed after switching on
The centrifugation data of program 1 or the last program used is displayed
after switching on.
1. Press and hold the [SELECT] button.
🡆
‘*MACHINE MENU*’ is displayed after 8 seconds.
2. Press the [SELECT] button repeatedly until ‘-> Settings’ is displayed.
3. Press the [START/PULSE] button.
🡆
‘End beep = on’ or ‘End beep = off’ is displayed.
4. Press the [SELECT] button repeatedly until ‘Start Pr = First’ or ‘Start
Pr = Last’ is displayed.
5. Use [Adjustment buttons] to set ‘Last’ or ‘First’ .
Last = last program used
First = program 1
6. Press the [START/PULSE] button.
🡆 The setting is stored.
‘Store setting...’ is displayed briey.
‘-> Settings’ is then displayed.
7. Press the [STOP/OPEN] button once to exit the ‘-> Settings’ menu
or
Press the [STOP/OPEN] button twice to exit the ‘*MACHINE MENU*’ .
7.4.9
Indicator backlight
The indicator backlight can be switched off after 2 minutes to save energy.
The rotor is stationary.
1. Press and hold the [SELECT] button.
🡆 ‘*MACHINE MENU*’ is displayed after 8 seconds.
2. Press the [SELECT] button repeatedly until ‘-> Settings’ is displayed.
3. Press the [START/PULSE] button.
🡆 ‘End beep = on’ or ‘End beep = off’ is displayed.
4. Press the [SELECT] button repeatedly until ‘Power save=off’ or
‘Power save=on’ is displayed.
5. Use [Adjustment buttons] to set ‘off’ or ‘on’ .
off: Backlight is switched off.
on: Backlight is switched on.
6. Press the [START/PULSE] button.
🡆 The setting is stored.
‘Store setting...’ is displayed briey.
‘-> Settings’ is then displayed.