AB1101en_SARev.: 03 / 11.2023
Fig. 16: Transport lock
1 Spacer sleeves
2 Screws
■ The storage temperature must be between -20°Cand+60°C.
■
Humidity must not be condensing. Humidity must be between 10%and
80%.
4.2 Fastening the transport lock
Personnel:
■
Trained user
The lid is closed.
The mains cable is disconnected from the device.
1.
Tilt the device on the back of the device.
2.
Insert 2 spacer sleeves (
1
).
3.
Screw in 2 screws (
2
).
5
Commissioning
5.1
Unpacking the centrifuge
CAUTION
Danger of crushing due to parts falling out of the transport
packaging.
− Keep the device balanced during the unpacking
process.
−
Only open the packaging at the points provided for this
purpose.
CAUTION
Risk of injury from lifting heavy loads.
− Provide an adequate number of helpers.
−
Note the weight. See ⮫
Chapter 3 ‘Device overview’
on page 9
.
NOTICE
Damage to the device due to improper lifting.
− Do not lift the centrifuge by the control panel or the
control panel holder.
Personnel:
■ Trained user
1.
Open the box at the top.
To Next Page
Loading...
