Switching the centrifuge on
Switching off the centrifuge
Opening the lid
Closing the lid
5.4 Switching the centrifuge on and off.
Personnel:
■
Trained user
Set the mains switch to
[I]
.
🡆 The buttons ash, depending on the centrifuge type.
The following indicators appear one after the other, depending on
the centrifuge type:
■ the centrifuge model
■
the machine type and program version
■
the rotor code (R) and the maximum speed (maxRPM) of the
last rotor recognised by the rotor detection
■ When the lid is closed: For centrifuges with cooling,
‘Open the
lid’
indicator. The lid opens in centrifuges without cooling.
■
When the lid is open: The centrifugation data of the last pro-
gram used or program 1.
The rotor is stationary.
Set the mains switch to
[0]
.
6
Operation
6.1
Opening and closing the lid
Personnel:
■
Trained user
The centrifuge is switched on.
The rotor is stationary.
Press the
[STOP/OPEN]
button.
🡆 The lid unlocks by means of a motor.
The
‘Lid unlocked’
indicator appears.
CAUTION
Danger of crushing when closing the lid.
Danger of crushing ngers when the closing motor pulls the
lid against the seal.
− No parts of the body should be in the hazard zone of the
lid when closing the lid.
−
To close the lid, press on the lid from above.
NOTICE
Damage to the device caused by the lid slamming.
− Close the lid slowly.
−
Do not slam the lid.
Personnel:
■
Trained user
To Next Page
Loading...
