What to do if the Hettich Laboratory Equipment displays an error message?
When the speed display on the front panel of your Hettich Laboratory Equipment shows an error message, consult the 'Error messages' chapter to identify the error code. Then, follow the provided instructions to fix the error. After any repair or component replacement, perform a functional check as described in the 'Functional check after a repair' chapter.
How to perform a mains reset on Hettich Laboratory Equipment?
To perform a mains reset on your Hettich Laboratory Equipment, switch off the mains switch. Wait for at least 10 seconds before switching it back on.
Describes the control panel's input, indication, and communication functions.
Details the motor's connection, type, and how it is controlled.
Step-by-step instructions for performing a MAINS RESET to clear errors.
Provides detailed troubleshooting steps for resolving specific error conditions.
Addresses troubleshooting for issues that do not trigger explicit error codes.
Instructions for setting the correct machine version based on the centrifuge model.
Steps for removing, replacing, and installing the power board.
Instructions for exchanging and adjusting the imbalance switch.
Procedure for removing and replacing the lid lock mechanism.
General| Max RCF | 4200 x g |
|---|---|
| Capacity | 4 x 1000 ml |
| Weight | 75 kg |
| Timer | 1 - 99 min |
| Type | Centrifuge |
| Max Speed | 6000 rpm |
| Power Supply | 230 V / 50 Hz |
To Next Page