Hettich EBA 20 - Error Messages; MAINS RESET

9/31
5 Error messages
The error message will be indicated in the speed display of the front panel
e.g. :
RPM x 100
t
START
STOP
5.1 MAINS RESET
• Switch off the mains switch.
• Wait at least for 10 seconds and then switch on the mains switch again.
5.2 Brief description
Display. Fault Brief description Page
- 1 - Tacho error Tacho pulses break down 10
- 2 - System reset Mains interrupt 10
- 3 - Imbalance Imbalance on the motor axis 10
- 4 - Communication Communication error 11
- 5 - Overload Fault in the motor or the motor control 11
- 7 - Overspeed Fault in the power board 11
Versions Error Wrong machine version setting 12
- d - Lid lock error Fault in lid lock system 12