AB1800en_SARev.: 03 / 11.2023
Fault description Cause Remedy
COM ERROR 31-36 Error/defect in electronics.
■ Perform a MAINS RESET.
FC ERROR 60, 61.1-61.21,
61.64-61.142
Error/defect in electronics.
■ Perform a MAINS RESET.
FC ERROR 61.23 Speed measurement error.
■ Do not switch off the device while
‘Rotation’
is displayed.
■
Perform a MAINS RESET if
‘Lid
locked’
is displayed.
TACHO ERR 61.22 Speed measurement error.
■ Do not switch off the device while
‘Rotation’
is displayed.
■
Perform a MAINS RESET if
‘Lid
locked’
is displayed.
FC ERROR 61.153 Error/defect in electronics.
■ Perform a MAINS RESET.
■
Open the lid.
■ Check the loading of the rotor.
■ Repeat the centrifugation run.
The left
half of the display lights up.
-
■ Notify customer service.
9.2
Perform a MAINS RESET
1.
Set the mains switch to
[0]
.
2.
Wait 10 seconds.
3.
Set the mains switch to
[I]
.
9.3
Emergency release
The lid cannot be unlocked by the motor in the event of a power failure.
Emergency unlocking by hand must be performed.
WARNING
Risk of electric shock due to maintenance and servicing
work on live device.
− Disconnect the device from the mains before carrying
out repairs and maintenance.
WARNING
Danger of cutting and crushing due to moving rotor.
− Do not open the lid until the rotor has stopped.
Personnel:
■
Trained user
To Next Page
Loading...
