Hettich EBA 200 - Device Overview; Technical Data

9 / 39
Rev.: 03 / 11.2023
AB1800en_SA
Device overview
NOTICE
Damage to the device electronics due to incorrect voltage or
frequency at the device circuit breaker.
− Operate the device with the correct mains voltage and
mains frequency.
The value can be found in the technical data and on the
rating plate.
NOTICE
Damage to the device and samples due to premature pro-
gram termination.
Premature program termination is caused by power failure,
switching off during the program or pulling out the mains
plug.
− Do not switch off the device while the program is run-
ning.
−
Do not trigger the emergency release on the device
while the program is running.
− Do not pull out the mains plug while the program is
running.
3
Device overview
3.1
Technical data
Manufacturer Andreas Hettich GmbH & Co.KG,
D-78532 Tuttlingen
Model EBA 200 EBA 200 S
Type 1800 1800-01 1802 1802-01
Mains voltage (
±10%)
200-240V1
～
100-127V1
～
200-240V1
～
100-127V1
～
Mains frequency 50-60 Hz 50-60 Hz 50-60 Hz 50-60 Hz
power consumption 100 VA 100 VA 160 VA 160 VA
Power consumption 0.5A 1.0A 0.75A 1.5A
max. capacity 8 x 15 ml
max. permissible density 1.2kg/dm
³
max. speed (RPM) 6000 8000
max. acceleration (RCF) 3461 6153
max. kinetic energy 750 Nm 1750 Nm
Obligation to perform
checks
(DGUV Rules 100-500)
(valid only in Germany)
No