Hettich EBA 200 - Spare Parts, Scope of Supply, and Returns

AB1800en_SARev.: 03 / 11.2023
14 / 39
Device overview
Fig. 8: [t] button
Fig. 9: [RCF] button
Fig. 10: [SELECT] button
Fig. 11: [START/PULSE] button
Fig. 12: [STOP/OPEN] button
■ Enter runtime.
Adjustable up to 1minute in 1second increments and from 1minute in
1minute increments.
■ Enter the centrifugation parameters.
■
The value changes at an increasing rate if the button is held down.
■ Toggle between RCF indicator and RPM indicator.
■
Relative centrifugal force, RCF.
The RCF is displayed in brackets ñá.
■ Speed, RPM.
■ Selecting the individual parameters.
■ Open ‘MACHINE MENU’ .
■
Scroll forward in the menus.
■
Start centrifugation run.
■ Short-term centrifugation. The centrifugation run takes place as long as
the button is being pressed.
■
Open submenus.
■
End the centrifugation run.
The rotor ramps down to a stop at the preselected brake level.
■
Pressing the button twice triggers the quick stop function.
■
Unlock the lid.
3.6
Original spare parts
Only use original spare parts from the manufacturer and approved accesso-
ries.
3.7
Scope of supply
The following accessories are supplied with the centrifuge:
■
2 Fuse link
■
1 hex key (SW5x100)
■
8 Adapter 1059 (EBA 200 S only)
■
1 Rotor
■
1 power cable
■ 1 user manual
■ 1 instruction sheet, transport lock
■ 1 Emergency release instruction sheet
3.8 Returns
An original Return Material Authorisation (RMA) form from the manufacturer
must always be requested for a return. Secure and reliable acceptance and
booking in of the goods with the manufacturer is not possible without an
original RMA form from the manufacturer. The Return Material Authorisation
(RMA) form contains a Declaration of No Objection (UBE), which must be
completed in full and enclosed with the return.