Need help?Do you have a question about the Hettich ROTANTA 460 R and is the answer not in the manual?
General| Temperature control | Yes |
|---|---|
| Max Speed | 15, 000 rpm |
| Max RCF | 24, 400 x g |
| Capacity | 4 x 750 ml |
| Temperature Range | -20°C to +40°C |
| Power Supply | 230 V, 50/60 Hz |
| Type | Centrifuge |
Defines the intended medical applications for centrifuging blood components.
Outlines requirements for trained users and personal protective equipment.
Provides warnings and instructions for hazardous situations and incidents.
Specifies environmental conditions and precautions for safe transport and storage.
Guides on placing the device, maintaining clearance, and adhering to ambient conditions.
Detailed steps for removing and installing the rotor, including clamping nut procedures.
Provides warnings and instructions for loading centrifuge tubes, emphasizing safety with hazardous materials.
Explains how to load swing-out rotors symmetrically and within weight limits.
Explains the function and importance of biosafety systems for hazardous materials.
Step-by-step guide for running the centrifuge continuously without time preselection.
Step-by-step guide for running the centrifuge continuously without time preselection.
Instructions for centrifuging with a set time, covering parameter setting and ramp-down.
Guide for performing short-term centrifugation runs, including start procedures.
Configuring acceleration and deceleration parameters for centrifugation runs.
Configuring acceleration and deceleration parameters for centrifugation runs.
Setting the duration for centrifugation runs, including continuous operation.
Adjusting rotor speed and understanding RPM settings for optimal centrifugation.
Setting and monitoring the temperature within the centrifuge chamber.
Setting Relative Centrifugal Force (RCF) and centrifuging radius for operation.
Steps to create, save, and link multiple programs together.
Procedures for creating new programs or editing existing ones.
Explains the automatic rotor detection process and its implications.
General guidelines and recommendations for using the centrifuge's cooling function.
How temperature monitoring protects samples and the device from deviations.
Setting program locks (Level 1, 2, 3) to restrict program access.
Setting a Personal Identification Number (PIN) for security.
Creating, saving, and managing sequences of multiple programs.
Steps to create, save, and link multiple programs together.
Detailed instructions and safety warnings for cleaning and disinfecting the device and its accessories.
Guidelines for disinfecting the centrifuge and its components.
Detailed specifications for various swing-out rotors and their compatible buckets.
To Next Page
