User manual for G3
24
Time, Meter No. SGC No. Meter Software Version No. Last 5 accepted
credit tokens, etc. The automatic scroll contents are configurable.
⚫ Keypad display
⚫ Because the CIU has no Keypad, customer key in code through the IR
remote controller. While the customer strokes the keypad on the
controller, CIU shows the information just input. After a period of keypad
silence, CIU will go back to automatic scroll again.
⚫ Power off display
⚫ After the CIU power off, the LCD will shut down in order to save the
battery energy. But once the customer strokes the button on the front of
the CIU, the display on and the display mode will switch to Keypad display
mode. If no button is stroked on the IR remote controller, CIU display will
power off again.
Status indicator
The LCD displays the tamper and event indictors if the tamper/event happens.
⚫ Meter cover open ， S2.
⚫ Over load， S4.
⚫ The open meter cover detection function disabled S5.
⚫ Meter under factory mode， S7.
⚫ Meter bypass， S8
To Next Page
Loading...
