HEXING CIU EV800 - Management Token; Test Token

User manual for G3
29
Management token
Any of the following Management tokens may be submitted:
⚫ Setting the maximum power.
⚫ Clearing the credit balance.
⚫ Changing the meter key.
In terms of the STS standard the meter requires 2 token codes to change the
key. There is no sequence between two tokens but the user must enter the
second token within 2 minutes after entering the first token otherwise the first
token entered will be disregarded.
⚫ Clear event status.
⚫ Prepayment mode to postpaid mode.
⚫ postpaid mode to Prepayment mode
Test token
Test Token
Full test
5649-3153-7254-5031-3471
Relay test
0000-0000-0001-5099-7584
LCD test
0000-0000-0001-6777-4880
Display import active energy.
0000-0000-0002-0132-8896
Display the key version.
1844-6744-0738-4377-2416
Display tariff index
3689-3488-1475-5332-2496
Display maximum power.
0000-0000-0012-0797-4400
Display meter status.
0000-0000-0022-8172-8512
Display power
0000-0000-0044-2920-8064
Display meter version
0000-0000-0087-2419-5840
Display three-phase imbalance level
0000-0000-0173-1410-5857