22
4.2.4 Menu item delete all
Selecting this menu item will erase all data (measurement arrays, single arrays). This
operation can take a view seconds and is displayed by a progress bar.
4.2.5 Menu item info
This menu item shows the failure state from the handheld/sensorhead and the software
version.
4.2.6 Error indication
Indication Cause
Wrong sensor head after power up No sensor head plugged in
Wrong sensor head during operation
• The sensor head has been changed
without turning off the device.
• You try to measure a layer which was
created with another sensor head
• No sensor head plugged in
The real time clock fails Coin cell is low
The measurements are lost
Coin cell is low
The device is not be able to power up Accumulator is low
The device turns off unexpected Accumulator is low
To Next Page
Loading...