EasyManua.ls Logo

HF Elfin-EW10 User Manual

HF Elfin-EW10
38 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
HF2211S_EW1X_PW1X Operation Guide
http://www.hi-flying.com/ - 1 -
HF2211S_EW1X_PW1X
Operation Guide
This document applies to the following series of products, please refer
to the user manual for product hardware description.
Elfin-EW10
Elfin-EW10-0
Elfin-EW11
Elfin-EW11-0
HF2211S
Protoss-PW11
Question and Answer IconNeed help?

Do you have a question about the HF Elfin-EW10 and is the answer not in the manual?

HF Elfin-EW10 Specifications

General IconGeneral
Max Data Rate150 Mbps
Wireless Standard802.11 b/g/n
Antenna TypeExternal Antenna
Ethernet Interface10/100 Mbps
Bandwidth20 MHz

Summary

Introduction to Product Series

Elfin-EW1X EVK, Connectors, and Cables

Details Elfin-EW1X EVK, 4/8-pin connectors, RJ45 cables, and interface conversion cables.

Specific Hardware Models: HF2211S & Protoss-PW11

Details the hardware specifications and components of HF2211S and Protoss-PW11 devices.

Hardware Introduction

Power Supply and Interface Connections

Covers power supply needs for all models and explains RS232/RS485 interface connections.

Initial Setup and Configuration

Webpage Configuration (SSID, IP, WiFi, System)

Guides setup via web interface: Wi-Fi AP search, IP settings, system config.

Default Serial, Socket, and Other Settings

Details default serial/socket parameters; covers backup, restore, upgrade.

IOTService Device Management

Instructions for managing and configuring devices using the IOTService application.

Serial Port Operations

SecureCRT Setup and Serial Parameter Configuration

Guide to using SecureCRT, setting serial parameters, and accessing CLI mode.

Test Examples

AP Mode Networking and TCP Server Test

Demonstrates AP mode operation, PC connection, and TCP server tests.

STA Mode Networking and TCP Tests

Guide to STA mode, TCP server/client tests in STA mode.

STA HTTP and MQTT Client Tests

Guides for testing HTTP GET/POST and MQTT client functionality.

Firmware Upgrade and System Management

Firmware Upgrade Procedures

Instructions for upgrading device firmware via webpage or IOTService.

Factory Reset and Application Case References

Methods for restoring device to factory settings and references to application manuals.

Appendix: References

Test Tools and Smartlink V8

Links to IOTService Configure Software and Smartlink V8 APP.

Related product manuals