To Next PageTo Next Page
Need help?Do you have a question about the HF HF2411 and is the answer not in the manual?
General| Brand | HF |
|---|---|
| Model | HF2411 |
| Category | Network Hardware |
| Language | English |
Explains the IP address usage for network communication via TCP and UDP.
Details various operating modes: Transparent Throughput, SMS, HTTP, WebSocket, MQTT.
Enables automatic registration package addition to the server upon connection.
Periodically sends heartbeat data to maintain server connection and status.
Supports up to 3 sockets and allows specifying serial port data routing to specific channels.
Defines how serial data is framed based on byte intervals for transmission.
Provides methods for upgrading device firmware via serial port or network.
Details the IOTService tool for configuring serial port and network modes.
Describes ModbusRTU to ModbusTCP conversion for connecting Modbus slave devices.
Covers NTP time synchronization and virtual COM port creation via IOTBridge.
Supports Hi-flying I.O.T script for data transfer and automated device operations.
Explains how to switch the device between transparent and AT command line modes.
Details how to send AT commands directly within the transparent transmission mode.
Introduces AT command structure, syntax, and lists available commands.
Defines the standard format for AT commands, including prefixes, parameters, and syntax.
Provides detailed explanations and parameters for various AT commands.
