HF Elfin-EW11-0 User Manual

HF2211S_EW1X_PW1X Operation Guide
http://www.hi-flying.com/ - 1 -
HF2211S_EW1X_PW1X
Operation Guide
This document applies to the following series of products, please refer
to the user manual for product hardware description.
Elfin-EW10
Elfin-EW10-0
Elfin-EW11
Elfin-EW11-0
HF2211S
Protoss-PW11

HF Elfin-EW11-0 Specifications

General

Brand	HF
Model	Elfin-EW11-0
Category	Network Hardware
Language	English

Summary

3. INITIAL SETUP

3.1. Webpage Set

Guides on setting up the device via its webpage interface and connecting via Wi-Fi.

3.2. IOTService Set

Explains how to use IOTService for managing, configuring, and communicating with the devices.

4. SERIAL PORT SETTINGS

4.1. Serial Port Tool SecureCRT

Instructions on using SecureCRT to connect and configure serial port parameters.

4.2. Setting Serial Port Parameters

Details on setting baud rate, data bits, parity, and stop bits for serial communication.

4.3. CLI Instruction Mode

How to enter and use Command Line Interface (CLI) mode for device configuration.

5. TEST EXAMPLE

5.1. AP Wireless Networking

Guides on setting up and testing the device in AP mode for wireless networking.

5.2. TCP Server Test in AP Mode

5.3. STA Wireless Networking

5.4. TCP Server Test in STA Mode

5.5. STA TCP Client Test

5.6. STA HTTP Client Test

5.7. STA MQTT Client Test

5.8. Firmware Upgrade

Provides instructions for upgrading the device firmware via webpage or IOTService.

5.9. Restore to Factory Setting

Explains how to restore the device to its factory default settings using CLI or the reload button.