HF Elfin-EW11 User Manual

HF2211S_EW1X_PW1X Operation Guide
http://www.hi-flying.com/ - 1 -
HF2211S_EW1X_PW1X
Operation Guide
This document applies to the following series of products, please refer
to the user manual for product hardware description.
Elfin-EW10
Elfin-EW10-0
Elfin-EW11
Elfin-EW11-0
HF2211S
Protoss-PW11

HF Elfin-EW11 Specifications

General

Operating Voltage	3.3V
Power Input	5V
Modulation	DSSS, OFDM
Ethernet Interface	10/100Base-T
Operating Temperature	-40°C to 85°C

Summary

Introduction to HF Products

HF2211S Hardware

Protoss-PW11 Hardware

Initial Device Setup

Webpage Configuration

Guide to configuring the device via its webpage interface.

IOTService Configuration

Instructions for managing and configuring devices using IOTService.

Serial Port Settings and CLI

Using SecureCRT for Serial Port

Setting Serial Port Parameters

CLI Instruction Mode Access

Test Examples and Applications

AP Wireless Networking Setup

TCP Server Test in AP Mode

Performing TCP server tests when the device is in AP mode.

STA Wireless Networking Setup

TCP Server Test in STA Mode

Performing TCP server tests when the device is in STA mode.

STA TCP Client Test

Conducting STA TCP client tests to communicate with a server.

STA HTTP Client Test

Testing HTTP client functionality in STA mode.

STA MQTT Client Test

Testing MQTT client functionality in STA mode.

Firmware Upgrade Procedures

Instructions for upgrading the device firmware.

Restore to Factory Settings

How to reset the device to its factory default settings.