Note: The CMA is designed to cable the enclosure to meet the needs of your specific
configuration.
Figure 9: Cable Management Assembly
10.5 Power Cords
The 4U60 Storage Enclosure contains a power cord for each of the two PSUs.
Note: It is highly recommended that you use the power cords that have been approved for this particular
enclosure. For a list of approved power cords, see: Host Connectivity on page 19.
10.6 HD Mini-SAS Cables
The 4U60 Storage Enclosure contains an HD Mini-SAS cable for each of the two ESMs.
Note: It is highly recommended that you use the HD Mini-SAS cables that have been approved for this
particular enclosure. For a list of approved HD Mini-SAS cables, see: Host Connectivity on page 19.
10.7 Expansion Cables
The 4U60 Storage Enclosure has the option to utilize expansion cables to allow for the connection of up to
four enclosures.
Note: It is highly recommended that you use the Expansion cables that have been approved for this
particular enclosure. For a list of approved expansion cables, see: Host Connectivity on page 19.
37
10 Customer Replaceable Units
User Guide 10.5 Power Cords
To Next Page
Loading...
Need help?
General