HGST Ultrastar 7K4000 (SAS) Hard Disk Drive Specification
114
18.7.9 Log Sense Page F
This page contains the Application Client Log.
Table 79: Log Sense Page F
The following table describes the application client log parameter structure.
Table 80: Log Sense Page F, Application Client Log
Parameter code 0000h through 003Fh are supported.
The values stored in the parameter bytes represent data sent to the device in a previous LOG SELECT command.
Byte
Bit
7654321
0
0 Reserved Page code = 0Fh
1 Reserved
2-3 Page length = 4000h
Application client log parameter
4-259 1st application client log parameter
16132-
16387
64th application client log parameter
Byte
Bit
76543210
0-1 Parameter code
2
DU
= 1
DS
= 0
TSD = 0 ETC = 0 TMC = 0 F&L = 00b
3 Parameter length = FCh
4- First parameter byte
255 Last parameter byte