HGST HUS724040ALS640 User Manual

HGST Ultrastar 7K4000 (SAS) Hard Disk Drive Specification
287
20.1.9.3 Response to SCSI Command in Degraded Mode - Spindle Start Failure
Table 233: Spindle Motor Degraded Mode - Spindle Start Failure
Command (w/Option) Response
Request Sense Executed. The Target may return Sense Key 02h (Not Ready) ASC/ASCQ
0400h (Start Spindle Motor Fail)
Inquiry (EVPD=0) Executed
Inquiry (EVPD=1) Executed and Check Condition is returned with Sense Key 05h (Illegal Request)
ASC/ASCQ 2400h (Invalid Field in CDB)
Test Unit Ready Executed and Check Condition is returned with Sense Key 02h (Not Ready)
ASC/ASCQ 0400h (Start Spindle Motor Fail)
Start Stop Unit
(Start)
Executed
- Success: Good Status is returned. Motor Degraded Mode is cleared
- Spindle Motor Start Failure: Check Condition with Sense Key 02h (Not Ready)
ASC/ASCQ 0400h (Start Spindle Motor Fail)
- Self Configuration Failure: Check Condition with Sense Key 02h (Not Ready)
ASC/ASCQ 4080h (Diag Fail- Bring up Fail)
Sense Key 02h (Not Ready) ASC/ASCQ 4085h (Diag Fail-RAM Code NOT
load)
Start Stop Unit
(Stop)
Executed. Good Status is returned. Motor Degraded Mode is NOT cleared
Other Commands Not Executed. Check Condition Status is returned with Sense Key 02h (Not
Ready) ASC/ASCQ 0400h (Start Spindle Motor Fail)

HGST HUS724040ALS640 Specifications

General

Brand	HGST
Model	HUS724040ALS640
Category	Storage
Language	English