HGST Ultrastar 7K4000 (SAS) Hard Disk Drive Specification
326
21.14 Error Codes
All error codes are compliant with the TCG Core specification and SIIF, except in the following case:
ï‚· The maximum sessions allowed at any single time is 1. When a session is active and a new session is requested, the
drive answers the host with SP_BUSY, instead of NO_SESSIONS_AVAILABLE.
21.15 Customer Specific Requirements
This specification does not cover customer-specific requirements. Customer-specific requirements are submitted by the cus-
tomer to HGST in the form of a customer-specification document.
Command Description unlocked Locked
Base Template Mandatory
Set Sets a value in a table
N/A - table opera-
tions. Not related
to bands/data on
drive.
N/A - table opera-
tions. Not related to
bands/data on drive.
Get Gets (reads) a value in a table
N/A - table opera-
tions. Not related
to bands/data on
drive.
N/A - table opera-
tions. Not related to
bands/data on drive
.
ParamCheck LRC TPer implements param check LRC (longi-
tudinal Redundancy Check) on get/set
method calls on PIN value
N/A N/A
Next
Iterates over all the rows of a table.
Method requires user to specify "where"
(row in table) and a "count". If where not
specified, 1st row in table is used. For
count not specified, default is number of
last row in table. Returns 0 or more row
number/uidref pairs currently in use in
table, per parameters specified.
N/A - table opera-
tions. Not related
to bands/data on
drive.
N/A – table opera-
tions. Not related to
bands/data on drive.
Authenticate Authenticate an authority within a session
(session must have successfully begun)
.
Must be autho-
rized.
Must be authorized.
GatACL Returns contents of access controls associa-
tion's ACL stored in Method Table. The
result is a list of uidrefs to ACE objects.
N/A - table opera-
tions. Not to do
with bands/data on
drive.
N/A – table opera-
tions. Not related to
bands/data on drive.
Command Description unlocked Locked
Locking Template Mandatory
Erase Cryptographically erases user data in a
specified LBA range and resets the access
control (locking) of that LBA
Can erase if autho-
rized.
Generates error
.