1
Product introduction
LD2410 is a high-sensitivity 24GHz human presence status sensing module developed by
Hilink Electronics. Its working principle is to use FMCW frequency-modulated continuous
wave to detect human targets in the set space. Combined with radar signal processing and
accurate human body sensing algorithms, it realizes high-sensitivity human presence status
sensing, and can identify human bodies in motion and stationary states. And auxiliary
information such as the distance of the target can be calculated.
This product is mainly used in indoor scenes to sense whether there is a moving or micro-
moving human body in the area, and output the detection results in real time. The farthest
sensing distance can reach 5 meters, and the distance resolution is 0.75m. Provides a visual
configuration tool, which can easily configure the sensing distance range and sensing in
different intervals
Sensitivity and unmanned delay time, etc., to adapt to different specific application needs.
Support GPIO and UART output, plug and play, and can be flexibly applied to different smart
scenarios and terminal products.
Height
1.5~2m
5m
picture 1 Diagram of how to use
To Next Page
Loading...
Need help?
General
