Hi-Link HLK-LD2410C - 8 Radome Design Guidelines; 8.1 Radome Effect on Performance; 8.2 Radome Design Principles; 8.3 Common Radome Materials

Shenzhen Hi-Link Electronic Co., Ltd. Manual
Page
19
/ 19
HLK-LD2410C
• Radome thickness D
• Recommended half wavelength, error control±20%
• If the thickness requirement of half wavelength cannot be met
• It is recommended to use low materials
• Thickness recommended 1/8 wavelength or thinner
• Influence of heterogeneous materials or multi-layer composite materials on radar performance,
it is recommended to make experimental adjustments during design
Table 3 Common Material Properties of Radomes
9. Revision records
Date
Version
Modify the content
2022-11-7
1.00
Initial version
10. Technical support and contact
Shenzhen Hi-Link Electronic Co.,Ltd
Phone：0755-23152658/83575155
Website：www.hlktech.net