Specifications Page 1-10
L000950, Version: 4.0 February 2016
Power Source Voltage,
Amp & Frequency
Supply Voltage/Amp: 100-240 VAC, 3.5 A Max
Supply Frequency: 50 Hz and 60 Hz
Resin Scramble Option
The system can hide any information printed with the resin panel.
Ship Weight
Printer: 16 lbs. / 7.3 kg
Printer + Dual-Sided Module: 22 lbs. / 10 kg
Printer + Single-Sided Lam Module: 28 lbs. / 12.7 kg
Printer + Dual-Sided Module + Dual-Sided Lam Module
: 6 lbs. / 16.4 kg
Single Wire Encryption
Options
• Contactless Smart Card Encoder (HID iCLASS and MIFARE)
• Contact Smart Card Encoder reads from and writes to all ISO7816-1 and 2
and 3 and 4 memory and microprocessor smart cards (T=0, T=1) as well as
synchronous cards
• Prox Card Reader (HID read-only)
Supply Frequency
50 Hz / 60 Hz
Supply Voltage
120-240 VAC
System Requirements
x86 based PC or compatible
• 500MHz computer with 256MB of RAM or higher
• 500MB free hard disk space or higher
x64 based PC or compatible
• 1GHz computer with 512MB of RAM or higher
• 32GB hard disk drive
Warranty
Printer: Three year (One year On-Call Express, U.S. only).
• Three (3) Year Factory Warrant
y
• Covers parts and depot repair
• First year On-Call-Express (loaner printer U.S. only)
• 2
nd
year On-Call-Express available for a fee. This must be purchased
before the first year On-Call-Express expires.
Printhead: Lifetime; unlimited pass with Fargo-certified Cards
Component Description
To Next Page
