Need help?Do you have a question about the HID FARGO DTC1500XE and is the answer not in the manual?
General| Print Resolution | 300 dpi |
|---|---|
| Print Technology | Dye sublimation |
| Print Speed | Up to 225 cards per hour |
| Card Capacity | Input Hopper: 100 cards Output Hopper: 100 cards |
| Connectivity | USB, Ethernet |
| Card Sizes | CR-80, CR-79 |
| Card Thickness | Up to 40 mil |
| Operating System Support | Windows 7, 8, 10, Server 2008, 2012, 2016 |
| Power Requirements | 100-240 VAC, 50/60 Hz |
Details the printer's compliance with various international and regional regulatory standards.
Provides critical safety instructions and warnings in multiple languages for safe operation.
Lists detailed technical parameters of the printer, including print method, resolution, and speed.
Outlines the printer's functional capabilities and printing technologies.
Describes the different types of print ribbons and their print counts.
Details the specifications and types of blank cards supported by the printer.
Provides guidelines for selecting an optimal location for the printer to ensure performance.
Instructs on how to unpack the printer and verify all included accessories.
Step-by-step guide for properly installing the print ribbon cartridge.
Details the procedure for loading blank cards into the printer's input hopper.
Explains how to set the card size for the printer, supporting CR-79 and CR-80 cards.
Guides on how to connect the printer to a power source for operation.
Provides instructions for installing the printer driver software on compatible operating systems.
Configures basic card characteristics like size, orientation, and access to utilities.
Allows selection of supplies, dual-sided printing, and other print job options.
Controls image quality, color matching, and heat settings for print output.
Adjusts the position of the printable area on the card for precise centering.
Configures magnetic stripe encoding settings for card data.
Manages lamination settings, including speed, side, and type.
Customizes where overlay and print areas appear on the card.
Controls the placement of the resin black panel in full-color prints.
Displays installed media information like ribbon type, card count, and firmware version.
Describes the printer's operational sequence to aid in troubleshooting.
Explains the functions of the printer's ON/OFF and Pause buttons for operation and error states.
Provides a table of error messages, their causes, and solutions for troubleshooting.
Details specific error codes, their causes, and recommended solutions for common issues.
Steps to upgrade the printer's firmware using the Fargo Workbench utility.
Explains how to interpret the serial number to determine the printer's manufacturing date.
To Next Page