EasyManua.ls Logo

HID FARGO DTC ii Plus User Manual

HID FARGO DTC ii Plus
14 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
FARGO® DTC®ii Plus
User Guide
PLT-05151, A.0.R
August 2020
Powering
Trusted Identities
Question and Answer IconNeed help?

Do you have a question about the HID FARGO DTC ii Plus and is the answer not in the manual?

HID FARGO DTC ii Plus Specifications

General IconGeneral
Print Resolution300 dpi
Print TechnologyDye Sublimation / Resin Thermal Transfer
Card Capacity100 cards input hopper, 30 cards output hopper
ConnectivityUSB
Card Sizes AcceptedCR-80 (3.375"L x 2.125"W / 85.6 mm L x 54 mm W)
Power Requirements100-240 VAC, 50/60 Hz
Operating Humidity20% to 80% (non-condensing)

Summary

Copyright and Trademarks

Copyright Notice

States that all rights are reserved by HID Global Corporation/ASSA ABLOY AB.

Trademarks Information

Lists HID Global, FARGO, and iCLASS as trademarks and mentions MIFARE.

Contact and Revision Information

Global Contact Offices

Provides contact details for Americas, Asia Pacific, Europe, Middle East, Africa, and Brazil.

What's New

Details the initial release of the document in August 2020.

Section 01 Specifications

Introduction to Specifications

Introduces the section covering regulatory compliances, agency listings, and technical specifications.

Regulatory Compliance Details

Covers UL, CSA, FCC, and Industry Canada compliance standards for the card printer.

Agency Listings

Lists emissions, immunity, and safety standards like FCC Part 15, RSS-GEN, and UL IEC 60950-1.

United States Compliance

Details FCC Part 15 compliance, operational conditions, and warnings for US users.

Canada Compliance

Outlines Industry Canada license-exempt RSS standards and operational conditions.

Safety Messages - United States

Provides critical safety instructions related to danger, ESD, and electrical hazards for US users.

Safety Messages - French

Provides critical safety instructions in French for danger, ESD, and electrical hazards.

Technical Specifications Overview

Details specifications for print method, resolution, colors, ribbon options, and print speed.

Card Specifications

Lists supported card sizes, accepted thickness, types, and input/output hopper capacities.

Printer Components and Capabilities

Covers printer memory, operating systems, interface, temperature, humidity, dimensions, and warranty.

Encoding Options Supported

Details supported encoding technologies like iCLASS, MIFARE, magnetic stripe, and smart cards.

Functional Specifications

Explains the printing technologies used for direct-to-card printing.

Printer Components: Print Ribbons

Describes ribbon types, letter codes, and print counts for various ribbon configurations.

Ribbon Types and Print Counts

Lists specific ribbon types for the DTCii printer and their corresponding print counts.

Printer Components: Blank Cards

Details card size, surface requirements, and UltraCard brand card specifications.

Revision History

Document Revision Log

Records the revision history of the user guide, starting with the initial release.

Related product manuals